Product ID:770-1756 (1/2" X 520") TEFLON THREAD SEAL TAPE
MSDS Date:07/11/1991
FSC:8030
NIIN:00D007485
MSDS Number: CGMQW

Emergency Phone: 800-537-7139

Info Phone: 800-537-7139

Cage: EO359

Telephone: 317-244-7241

Cage: 70842

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WHEN HEATED AT HIGH TEMPERATURES OVER
260C WILL THERMALLY DEGRADE & DECOMPOSE & PRODUCE TOXIC FUMES.INHAL
OF FUMES WILL CAUSE POLYMER FUME FEVER WHICH HAS SYMPTOMS SIMILAR
TO FLU & CAN INCLUDE HEADACH E,COUGH,FEVER,CHILLS,ETC.
Explanation of Carcinogenicity:PER MSDS:PROD CONTAINS CHEM KNOWN TO BE
CARCINOGEN BY NTP/IARC/OSHA:NO.
Effects of Overexposure:POLYER FUME FEVER WHEN HEATED AT HIGH
TEMPERAUTURES OVER 260C.

Flash Point:NON-FLAMMABLE
Autoignition Temp:Autoignition Temp Text:NP
Fire Fighting Procedures:WHEN HEATED @HI TEMPERATURES OVER 260C WILL
THERMALLY DEGRADE & DECOMPO & PRODUCE TOXIC FUMES.INHAL OF FUMES
WILL CAUSE POLYMER FUME FEVER-SYMPTOMS(SUPPLMENT)
Unusual Fire/Explosion Hazard:COMPLIES W/UL 94V-O UNDER NORMAL
CONDITIONS.CONTENT OF MAX 1% OF RESIDUAL LUBRICANT MAY CREATE
FIRE/EXPLO RISK IN SOME SPEC CASES.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DONT USE WHERE TEMP CAN EXCEED
260C.PRODUCT WILL THERMALLY DEGRADE & DECOMPO;THEREFORE DONT STORE
W/FLAMM MATLS.
Other Precautions:FOR APPLICATIONS WHICH INVOLVE HIGH CONCENTRATIONS OF
GASEOUS OXYGEN OR LIQUID OXYGEN THE USER SHOULD REFER TO THE OXYGEN
SUPPLIER TO DETERMINE IF ANY FIRE/EXPLOSION RISKS EXIST.

Respiratory Protection:NONE
Supplemental Safety and Health
FIRE FIGHTING:SIMILAR TO FLU & CAN INCLUDE
HEADACHE,COUGH,FEVER,CHILLS,ETC.

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:0.4-1.0BULK DEN
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:NON-SOLUBLE
Appearance and Odor:WHITE, NO ODOR
Percent Volatiles by Volume:NA
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
MOLTEN ALKALI,CERTAIJN HALOGEN PRODUCTS, AND FLUORINE AT HIGH
TEMPERATURES & PRESSURES.
Stability Condition to Avoid:TEMPERATURES OVER 260C AND OPEN FLAMES.

Waste Disposal Methods:DO NOT INCINERATE.DISPOSE OF IAW LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.